- will work longer.
- Filter housing
- 5-micron PP melt blown sediment filter
- Service wrench
Installation of the filter should be performed by a qualified specialist.
Connection to plumbing is implemented using metal-plastic pipes. You may need fittings or adapters (not included in the filter set).
Filter represents housing with replacement filter (not included).During the filtration process, water is supplied to the replacement filter, which removes impurities. As a result, you get pure water.
The Ecosoft sediment filter 1/2 is intended for purification of cold water only.
For permanent access to pure water we recomend replacing filters once every 2-6 months.
The service life of the replacement filter depends on the water condition and the volume of filtered water.
At the end of service life the filter has to be replaced. Unscrew the bulb with the service wrench. Take out the exhausted replacement filter, wash the bulb with tap water and insert the new replacement filter. Screw the filter housing tightly back onto the filter lid.
|Connection diameter||1/2″ NPT|
|Maximum capacity||10 L/min|
|Operating pressure||3.5-4 bar|
|Maximum pressure||30 bar|
|Temperature of water||+5…+35 °С|