Single filter for hot water
12,0 KWD
- Pure water for daily household needs in the apartment
- Clear water in the bathroom, protection of household appliances, plumbing, pipes and the main filter
- Purifies even hot water
- Fits for homes with up to 3 inhabitants
Basic information
The Ecosoft 1/2″ sediment filter housing is intended for purification of cold water for household purposes. Reduces the content of sand, silt, rust, scale and other insoluble impurities larger than 5 micron in tap and borehole water.
Connection to the plumbing is implemented with brass bushings.
Key advantages
- Protection of sanitary ware and plumbing.
- Affordable price for excellent quality from the Ukrainian manufacturer.
- Filter housing made of pure European first-grade plastic.
- Compact and easy to install.
- Due to the transparent housing, you will be able to visually determine when to replace the cartridge.
Perfect for
Apartments with 1 bathroom, inhabited by up to 3 residents.
Benefits of using the filter
- Shower and bath with pure and clear water.
- Shower and Jacuzzi spray will remain clean, water pressure will be high.
- Your home appliances and heating systems will work longer.
Components
- Filter housing
- 5-micron PP melt blown sediment filter
- Bracket
- Service wrench
- Screws
- User manual
PERFORMANCE
Filter installation
Installation of the filter should be performed by a qualified specialist.
Connection to plumbing is implemented using metal-plastic pipes. You may need fittings or adapters (not included in the filter set).
Filter represents housing with replacement filter (not included).During the filtration process, water is supplied to the replacement filter, which removes impurities. As a result, you get pure water.
MAINTENANCE
The Ecosoft sediment filter 1/2 is intended for purification of hot tap water only.
For permanent access to pure water we recommend replacing filters once every 2-6 months.
The service life of the replacement filter depends on the water condition and the volume of filtered water.
At the end of service life the filter has to be replaced. Unscrew the bulb with the service wrench. Take out the exhausted replacement filter, wash the bulb with tap water and insert the new replacement filter. Screw the filter housing tightly back onto the filter lid.
SPECIFICATIONS
Characteristics
Parameter |
Value |
| Standard size | 2.5″×10″ |
| Mounting position | Vertical |
| Connection diameter | 1/2″ |
| Connection port | Brass |
| Maximum flow rate | 10 L/min |
| Operating pressure | 3.5-4 bar |
| Maximum pressure | 8.6 bar |
| Temperature of water | +5…+75 °С |
| Maximum temperature | +80 °С |
